Operation; Basic Weighing Function - KERN AGB Série Mode D'emploi

Operation

Basic Weighing Function

Preparation
Turn on the balance: Press [ON/OFF]
To change configurations: See the chapter entitled "Configuring the Balance"
$ To tare the balance: Press t
Additional Functions
To turn off the balance: Press [ON/OFF]
Example
Basic weighing
Step
1. Turn on the balance
Self-test is performed
2. Place container on balance
(here: 52 g)
3. Tare the balance
4. Place sample in container
on balance (here: 150.2 g)
38
Warmup Time
$ To ensure accurate results, the balance must warm up for
30 minutes before operation. Only after this time will the
balance have reached the required operating temperature.
PGB510-2M
$ To ensure accurate results, the balance must warm up for at least
24 hours before operation the first time it is connected to power.
Only after this time will the balance have reached the required
operating temperature.
Key (or instruction)
[ON/OFF]
t
Display/Printout
+
52.0
g
+
0.0
g
+
150.2
g