36
Connecting the Balance to AC Power/
Safety Precautions
Use only original AC adapters
Insert the right-angle plug into the jack
The AC adapter rated to Class 2 can be plugged
into any wall outlet without requiring any additional
safety precautions
The ground is connected to the balance housing,
which can be additionally grounded for operation.
Using a Non-Rechargeable/Rechargeable Battery
(only for models PGB610-2 and PGB6100-1)
$ A non-rechargeable or rechargeable battery is not
included with the equipment supplied
Use only a commercially available non-rechargeable
!
or rechargeable 9-volt battery
When using a rechargeable battery, always use an
!
external charger to recharge the battery
Lay the balance on its side
Open the battery compartment:
Lift the compartment cover
Insert the 9-volt (rechargeable) battery in the
compartment
$ Make sure to connect the positive and negative
poles correctly
All used batteries are classified as waste that requires
!
special handling (not "household" waste). Dispose
of rechargeable batteries in accordance with the
applicable special waste disposal regulations.
Close the battery compartment:
Press down on the cover until it clicks into place