PowerWalker VFI 1000RT LCD Manuel page 43

12. Software Installation
WinPower is UPS monitoring software, featuring user-friendly interface to
monitor and control your UPS. This unique software provides complete power
protection for computer system while power failure. With the software users
can monitor any UPS status on the same LAN. Furthermore, a UPS can
provide security protection for more than one computer on the same LAN at
the same time, such as shutting down system in security, saving application
data and shutting down the UPS when power fails.
Software Installation on your PC:
Connected by USB to a PC or notebook, the Software enables
communication between the UPS and the computer. The UPS software
monitors the status of the UPS, shuts down the system before the UPS is
exhausted and can remotely observe the UPS via the Network (enabling
users to manage their system more effectively). Upon AC failure or UPS
battery low, UPS takes all necessary actions without intervention from the
system administrator. In addition to automatic file saving and system
shut-down functions, it can also send warning messages via pager, e-mail etc.
 Use the bundled CD and follow the on-screen instructions to install the
software WinPower.
 Enter the following serial No. to install software:
511C1-01220-0100-478DF2A
 After the software is successfully installed, the communication with UPS
has been established and an green icon will appear in the system tray.
 Double-click the icon to use the monitor software (as above).
 You can schedule UPS shutdown/start-up and monitor UPS status through
PC.
 Detail instructions please refer to the e-manual in the software.
Check www.powerwalker.com/winpower.html
latest version of monitoring software.
from time to time to get the
EN
39