Cleaning And Maintenance - La Cimbali M39 DT Utilisation Et Installation

For correct application of the hACCP system,
please follow the instructions in this paragraph.
MILK CIRCUIT AND COFFEE CIRCUIT CLEANING CYCLES
The purpose of the flushing cycle is to remove all traces of
grease and scaling deposited when the milk is conveyed and
emulsified and when the coffee is dispensed.
Failure to flush out the circuit will allow these deposits to
solidify. This will impair the qualitative performance of the
cappuccino maker and of the coffee circuit.
NOTE: the following operations must be carried out when
the machine is on and pressurized.
ATTENTION, RIsK OF sCALDING: During the wash cycles,
hot water, steam and milk residues will exit the cappuc-
cino nozzle and filter holders (11). Keep the hands and all
other parts of the body well away until the cleaning cycle
has terminated.
MILK CIRCUIT AND COFFEE CIRCUIT WASHING
CYCLES
Daily wash cycle at set hour
Function - The message "EXECUTE WAShING MILK
CIRCUIT" in alternation "EXECUTE COFFEE WAShING"
appears on the display at the set hour (consult the "Customer
programming - Service time menu" paragraph).
Activation - milk circuit: through key (28) on the selection
keypad. The message " MILK WAShING" appears on the
display.
Coffee circuit: according to the methods described in
"COFFEE CIRCUIT WASHING CYCLE"; the message
"GROUP WASh" accompanied by the group number will
appear on the display.
Selection block - milk circuit: 60' function from the hour
set if wash cycle has not taken place, with the "Block milk
circuit" function set (YES).
Coffee circuit: 60' from the hour set if wash cycle has not
taken place, with the "Block coffee circuit" function set
(YES).
Wash type - * milk circuit: with water and steam, and with
an external detergent in the place of the milk.
** Coffee circuit: with the detergent solution inserted in the
filter holder.
For more details, please consult the "Configuration menu -
wash options" paragraph.

20. Cleaning and maintenance

53
28 26
1
* MILK CIRCUIT WASHING CYCLE
First left-hand dispenser unit with cappuccino-selection
panel
(only for machines with cappuccino maker):
(Be careful, steam will come out of the cappuccino-maker's
dispensing spout).
1) Fill a container with ½ litre of cold water and one dose of
liquid detergent (see product instructions).
2) Remove the suction tube from the milk container and
immerse it in the solution.
3) Use command on the machine to suck detergent in.
The detergent sucked in and heated will clean the
"cappuccinatore".
4) Detergent should be sucked till steam comes out.
For "CAPPUCCINO MAKER" cleaning instructions and
methods, please consult the specific leaflet.
11