Customer Parameters Menu; Cleaning And Maintenance - La Cimbali M39 Class GT Utilisation Et Installation

To access "Customer parameters" press "
message shown below will appear on the display:
 CUSTOMER PARAMETERS
SERvICE TIME
ITALIANO
ENGLISH
FRANCAIS
DEUTSCH
Pressing the "PRG" key (29), the following message will ap-
pear on the display:
SERvICE TIME
DATE AND TIME
ON time
OFF time
Day off
Night ON
The following service time parameters can be modified:
- ON time (time the machine switches on);
- OFF time (time the machine switches off);
- day off (day on which the enterprise is closed);
- Night ON (start time for evening beverage price: only
when payment system is connected);
- Night OFF (end time for evening beverage price: only
when payment system is connected);
- Wash 1 (request - every 24 hrs - at the programmed hour;
cannot be disabled);
- Wash 2 (hour of scheduled washes 2)
- Wash 3 (hour of scheduled washes 3)
Pressing again the "PRG" key (29), the following message will
appear on the display:
 DATE AND TIME
Year
Month
Date
Hour
Minutes
Use the "+" (30) and "-" (31) keys to move the cursor (black
line) to the entry to be modified, then press the "PRG" (29) key.
The cursor will turn into an arrow è and it becomes possible
to change the number for the selected entry by using the "+"
(30) and "-" (31) keys.
Once the operation is completed, press the "RES" (24) key
to confirm the data.
Note: the cursor changes back to black line.
Repeat the operation described above to modify other para-
meters.

18. CUSTOMER PARAMETERS menu

" key (34); the
+ 
+ 
03:00
03:00
none
02:00
+ 
09
04 APR
22 WED
17
12
43 EN
General indications
If there is no day off (i.e. the enterprise never closes), enter
"none" for the "day off" item.
Enter the same time for the "ON time" and "OFF time" param-
eters (for example:
ON time
OFF time
if the automatic switch on/switch off function is not required and
you wish to manually switch the machine on and off.
"WAsh 1", "WAsh 2" AND "WAsh 3"
These are scheduled washes that are independent of the wash
cycles related to the switching on and switching off phases.
SERvICE TIME
WASH 1
WASH 2
WASH 3
After having positioned the cursor on the line to be changed
and after having pressed the "PRG" (29) key, change the value
using the "+" (30) and "-" (31) keys. Then press the "RES" (24)
key to confirm.
Repeat the above operations to change the other wash
scheduling times.
"Wash 1", "Wash 2", "Wash 3"
When these functions are requested, a long wash cycle is
performed (milk circuit and coffee circuit) as described in the
"Cleaning and maintenance" paragraph.
If the set hour for these wash cycles occurs when the machine
is switched off, the request will be canceled.
NOTE: Set OFF against the time so as to not activate these
wash cycles.
OFF is displayed press the "-" (31) key the indicated time is
"00:00"
For more details, please consult the "Configuration menu -
wash options" paragraph.
22:00
22:00)
+ 
18:30
OFF
OFF