Multiplex Pico Serie Notice De Construction page 8

TwinJet
TwinJet
1. Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope that
you are happy with the contents of your kit. However, we would ask you to check all the parts before you start construction,
as we cannot exchange components which you have already worked on. If you find any part is not acceptable for any
reason, we will readily correct or exchange it. Just send the component to our Model Department. Please be sure to include
a brief description of the fault.
We are constantly working on improving our models, and for this reason we must reserve the right to change the kit contents
in terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please understand that
we cannot entertain claims against us if the kit contents do not agree in every respect with the instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings. Building and operating
them safely requires a certain level of technical competence and manual skill, together with discipline and a
responsible attitude at the flying field. Errors and carelessness in building and flying the model can result in
serious personal injury and damage to property. Since we, as manufacturers, have no control over the
construction, maintenance and operation of our products, we are obliged to take this opportunity to point
out these hazards, and to emphasise your personal responsibility.
Additional items required:
RC system components:
MULTIPLEX Micro 5/7 receiver
MULTIPLEX MS-X3 servo (2 required)
PiCO-Control 400 DUO
Flight battery:
MULTIPLEX 7/RC2000-2L HS flight battery
More power
Installing two PERMAX 480 /7.2 V motors, # 33 2689, provides a significant increase in climb performance and airspeed. If you
use 480 motors an 8-cell flight battery is required.
Battery charger:
PiCO AUTO-charger for rapid-charging transmitter and flight packs
Adhesive:
MULTIPLEX "Medium Zacki"
MULTIPLEX "Zacki Activator"
PATTEX Kraft contact cement, or similar
Tools:
Scissors, combination pliers, balsa knife, razor saw or hacksaw blade, screwdriver, small round file
Specification:
Wingspan
Fuselage length
All-up weight 400 motors / 7 cells approx.
All-up weight 480 motors / 8 cells approx.
Wing area
Wing loading
RC functions
Separate the illustration pages from the centre of this booklet.
8
Building instructions
Function
35 MHz
40 MHz
Elevator / aileron
Speed control
Order No. 15 5529
910 mm
802 mm
1100 g
1200 g
approx. 25.5 dm²
min. approx. 43 g/ dm²
Aileron, elevator and motor
Order No. 21 4072
Order No. 5 5933
Order No. 3 5934
Order No. 6 5035
Order No. 7 5023
Order No. 9 2526
Order No. 59 2720
Order No. 59 2824
(not in MPX range)
Optional national decal set
The following decal sheets are
35,8 inch
available to help you differentiate
31,6 inch
between examples of the model:
38,8 oz
42,3 oz
black / red / yellow # 72 4104
395 sqinch
green / white / red
13,8 oz/sqinch
blue / white / red
red/white/red
UK
USA
# 72 4105
# 72 4106
# 72 4103
# 72 4101
# 72 4100