Viewing The Data (Figure 3-2) - MSA Galaxy Manuel D'instructions

• These settings are:
• Wired Interface (radio will be turned OFF on wireless units)
• IP: 192.168.0.100.

Viewing the Data (FIGURE 3-2)

All Test Stand installations have limited recordkeeping, including
instrument serial number and last calibration date. This data can be
viewed via the menu.
1. Access the menu by pressing ENTER (8 ) when the Test Stand is
idle and displaying:
<INSERT INSTRUMENT>".
2. From the menu, use the UP (á) or DOWN (â) to scroll to
"-VIEW DATA-".
3. Press ENTER (8 ) to select this option.
4. Select:
• "OVERDUE INST" to see all instruments currently due for
calibration or
• "INST INVENTORY" to see a report of all instruments
3-8