Viewing The Data (Figure 3-2) - MSA Galaxy Manuel D'instructions

• These settings are:
• Wired Interface (radio will be turned OFF on wireless units)
• IP: 192.168.0.100.

Viewing the Data (FIGURE 3-2)

All Test Stand installations have limited recordkeeping, including
instrument serial number and last calibration date. This data can be
viewed via the menu.
1. Access the menu by pressing ENTER ( ) when the Test Stand
is idle and displaying:
<INSERT INSTRUMENT>".
2. From the menu, use the UP ( ) or DOWN ( ) to scroll to
"-VIEW DATA-".
3. Press ENTER ( ) to select this option.
4. Select:
• "OVERDUE INST" to see all instruments currently due for
calibration or
• "INST INVENTORY" to see a report of all instruments
3-8