Lenz Digital Plus 10104 Manuel page 32

32
If value 10 is entered in the CV (no bit set), the corresponding
–56
output is permanently dimmed. If an allocation is entered (value
greater than 0, at least one bit set), the dimming can be
activated/deactivated with the selected function.
Each bit of the CV stands for a function of the Digital System:
Bit 1(0) for function 1, Bit 2(1) for function 2 and so on up to
Bit 8(7) for function 8. If you want to allocate a function to the
dimming, the respective bit must be set.
0-255 Dimm mapping for output A
54
0-255 Dimm mapping for output B
55
0-255 Dimm mapping for output C
56
0-255 Dimm mapping for output D
57
0-255 Lighting effects at function outputs A and B
58
The tens digit of the value
stands for function output B:
0
1
2
3
4
Examples:
'00' – No effect on outputs A and B.
'01' – Marslight at output A, no effect on output B
'23' – Gyralight at output B, Strobe at output A
No effect
Marslight
Gyralight
Strobe
Double strobe
The units digit of the value
stands for function output A:
0 No effect
1 Marslight
2 Gyralight
3 Strobe
4 Double strobe
Information LF101XF
0
0
0
0
0