Lenz Digital Plus 10104 Manuel page 21

The individual outputs A, B, C, D, E and F can be allocated variably to the various functions of the
Digital System. This allocation is carried out by programming the CVs.
-
Outputs A and
B:
-
-
-
Outputs C, D: -
-
-
Outputs E, F:
Press F0 to activate/deactivate the direction-dependent function (output A
alternating with output B),
Dimming with settable brightness (an individual dimming value can be set
for each output),
Various lighting effects
Press either key F1 to F12 to activate/deactivate
Dimming with settable brightness (an individual dimming value can be set
for each output),
Various lighting effects
Integrated free-wheel diodes facilitate direct connection of relays
Configurable for polarity-dependent light changes (default setting)
Press either key F1 to F12 to activate/deactivate
Dimming with settable brightness (an individual dimming value can be set
for each output),
Various lighting effects
Integrated free-wheel diodes facilitate direct connection of relays
Press either key F1 to F12 to activate/deactivate
21
E