Radio Synchronized Colck : Starting Up; France Inter Or Dcf Radio Synchronised Clock; Dhf Clock - Bodet Style 12 Instructions D'installation

V - Radio synchronized colck : starting up

5.1 France Inter or DCF radio synchronised clock

1) After connection of the clock on its support, orientate the antenna ( F ) until the LED (1) is
blinking regularly.
2) If reception is good, the clock will automatically set the time after a few minutes. In areas
where radio signal reception is difficult manually set the clock time (chapter 8) whilst awaiting
radio synchronization (reception at night is in general better).

5.2 DHF clock

1) After connection of the clock on its support, orientate the antenna ( F ) in line with the clock.
On leaving the factory, the DHF clock is set in "Initialisation" mode. On the initial powering up,
the time is initialised at 0h00, 1 jan. 2000.
The clock memorises the address of the transmitter and switches to normal mode automatically
when time is received.
18
1
F