3. Make sure lock plate 3 is in position.
4. Turn the emergency key to "
and then release it to the "
buzzer emits one (1) long sound and five (5)
short sounds.
5. Pull out the emergency stop switch lock
plate.
6. Turn the emergency key to the "
" position,
" position. The
7. Take the following steps to enter the pass-
(1) Turn the main switch to the "
and hold it until the buzzer sounds.
Turn the emergency key back to the "
position. The system turns to stand-by state
for passcode input.
code.
then release it. The main switch automati-
cally returns to the "
" position
" position and
" position.
67
"