Cooke & Lewis CLFDT60 Instructions page 22

A Installation B Installation C Montaż E Instalare F Instalación
All installation must be carried out by a competent person
A
or qualified electrician. Before connecting the mains supply
ensure that the mains voltage corresponds to the voltage on
the rating plate.
Direct Connection
This appliance must be connected directly to the mains using
an omnipolar circuit breaker with a minimum opening of 3 mm
between contacts.
The installer must ensure that the correct electrical connection
has been made and that it complies with the wiring diagram.
The cable must not be bent or compressed.
Regularly check the power cord for damage. If the supply cord
is damaged, it must be replaced by a special cord or assembly
available from the manufacturer or its service agent.
WARNING: This is a Class I appliance and MUST be earthed.
This appliance is supplied with a 3 core mains cable coloured
as follows:
Brown = L or Live
Blue = N or Neutral
Green and Yellow = E or Earth
EUR
N
(Blue)
L (Brown)
(Green/Yellow)
The fuse must be rated at 13 Amps.
To avoid the risks that are always present when you use an
electrical appliance it is important that this appliance is installed
correctly and that you read the safety instructions carefully to
avoid misuse and hazards. Please keep this instruction booklet
for future reference and pass it on to any future owners. After
unpacking the appliance please check that it is not damaged. If in
doubt, do not use the appliance but contact Customer Services.
N N
L L
UK
DOUBLE POLE SWITCHED FUSED SPUR OUTLET
A
FUSE ON
USE A 13AMP FUSE
A