Kärcher B 60 C Classic Mode D'emploi page 9

Faults
If the malfunction cannot be rectified with
the following measures, please contact the
aftersales service.
No cleaning solution
 Turn the dosing of the cleaning solution
to the desired value.
 Fill up fresh water reservoir.
 Check the hose for the feed of the
cleaning solution.
 Check dosing valve.
 Check connecting rod between the ro-
tary knob and the dosing valve.
Poor waste water vacuuming
 Push appliance faster.
 Clean the suction stub.
 Clean waste water outlet.
 Clean and dry the drive wheel.
 Check hose and joinings.
 Inadequate ground.
Squeegee leaves streaks
 Sweep loose dirt off the surface to be
cleaned.
 Clean pad.
 Clean suction lip.
 Replace fleece.
 Turn or replace suction lip.
 Inadequate ground.
Accessories
Pad, 5 x
Fleece, 3 x
Vacuum lip
Spare parts
– Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
– For additional information about spare
parts, please go to the Service section
at www.kaercher.com.
Warranty
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of your accessory within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication. In the event of a warran-
ty claim please contact your dealer or the
nearest authorized Customer Service cent-
er. Please submit the proof of purchase.
Technical specifications
Volume, fresh water reser-
voir
Volume of waste water tank l
Length
Width
Height
Typical operating weight
Theoretical surface cleaning
performance
3
-
EN
8.637-591.0
8.637-593.0
9.763-224.0
l 10
10
mm 1130
mm 635
mm 1090
kg 30
m /h 1500
2
9