Publicité
Les langues disponibles
Les langues disponibles
5 Work and safety instructions
5.1 General
•
Trainees should only work with the components and systems under the supervision
of an instructor.
•
Observe specifications included in the datasheets for the individual components,
and in particular all safety instructions!
•
Wear personal protective equipment (safety goggles, safety shoes) when working
on circuits.
5.2 Mechanical aspects
•
Switch off the power supply!
–
–
–
•
Risk of injury during troubleshooting!
–
•
Mount all of the components securely on the profile plate.
•
Make sure limit switches are not actuated from the front.
•
Set all components up in a way that enables easy activation of the switches and
disconnectors.
•
Follow the instructions regarding the positions of the components.
© Festo Didactic 8129446
Switch off both the operating power and the control power before working on
the circuit.
Only reach into the setup when it is at a complete standstill.
Be aware of potential overtravel times for the actuators.
Use a tool such as a screwdriver when actuating mechanical limit switches.
403-1 System, Distributing Pro-Joining-Sorting Inline – Operating instructions
CAUTION
WARNING
CAUTION
13
Publicité
