Wilo Yonos GIGA2.0-I Notice De Montage Et De Mise En Service page 181

12.7 Application and function of CIF
module
13 Display settings
Display settings
Brightness
Language
Units
Fig. 81: Display settings menu
13.1 Display brightness
13.2 Language
Installation and operating instructions Wilo-Yonos GIGA2.0-I/-D
Display settings
Twin-head pump example:
ƒ
Pump head left (l)
–
Wilo Net termination: ON
–
Wilo Net address: 1
ƒ
Pump head right (II)
–
Wilo Net termination: ON
–
Wilo Net address: 2
Depending on the type of CIF module inserted, a
associated settings menu is displayed in the menu.
The required settings of the CIF modules in the pump are described in the user manual
of the CIF modules.
General settings can be changed under
The following table gives an overview of the "Display settings" menu:
Universal Display text
1.0 Settings
1.5 Display settings
1.5.1 Brightness
1.5.2 Language
English English
Deutsch German
Français French
Universal Universal
1.5.3 Units
m, m³/h m, m
kPa, m³/h kPa, m
kPa, l/s kPa, l/s
ft, USGPM ft, USGPM
1.5.4 Key lock
1.5.4.1 Key lock ON
The display brightness can be changed under
level of brightness is shown in a percentage. 100 % brightness corresponds to maxi-
mum possible, 5 % is the minimum possible brightness.
Universal Display text
1.0 Settings
1.5 Display settings
1.5.1 Brightness
The language can be set under
The following languages can be selected:
Language abbreviations
EN
DE
FR
IT
ES
UNIV
"Settings", "External interfaces"
"Settings", "Display Settings".
3
/h
3
/h
"Settings", "Display settings". The
"Settings", "Display settings".
Language
English
German
French
Italian
Spanish
Universal
en
181