Wilo Yonos GIGA2.0-I Notice De Montage Et De Mise En Service page 166
Masquer les pouces
Voir aussi pour Yonos GIGA2.0-I:
- Notice de montage et de mise en service (121 pages) ,
- Guide d'installation rapide (28 pages)
Publicité
Les langues disponibles
Les langues disponibles
en
166
Double pump operation
Indication on the display of the main
pump
Case 2 – main/standby operation: only the partner pump is running.
Indication on the display of the main
pump
Case 3 – parallel operation: only the main pump is running.
Indication on the display of the main
pump
Case 4 – parallel operation: only the partner pump is running.
Indication on the display of the main
pump
Case 5 – parallel operation: only the main pump and partner pump are running.
Indication on the display of the main
pump
Case 6 - Main/standby or parallel operation: No pump running.
Indication on the display of the main
pump
Active influences of the pump status on the display in the home screen for twin-
head pumps
The active influences are listed from highest to lowest priority.
The symbols shown for the two pumps in twin-head pump mode mean:
ƒ
The left symbol represents the pump being viewed.
ƒ
The right-hand symbol represents the partner pump.
Name
Main/standby operation:
Error on partner pump OFF
Main/standby operation:
Error at the partner pump
Main/standby operation: OFF
Main/standby operation:
This pump head is active
Main/standby operation:
Partner pump active
Indication on the display of the partner
pump
Indication on the display of the partner
pump
Indication on the display of the partner
pump
Indication on the display of the partner
pump
Indication on the display of the partner
pump
Indication on the display of the partner
pump
Displayed
Description
symbols
Twin-head pump is set in main/
standby operation.
This pump head is inactive due to:
ƒ
Control mode
ƒ
Error at the pump partner.
Twin-head pump is set in main/
standby operation.
This pump head is active due to a
fault at the pump partner.
Twin-head pump is set in main/
standby operation.
Both pumps are inactive in control
mode.
Twin-head pump is set in main/
standby operation.
This pump head is active in control
mode.
Twin-head pump is set in main/
standby operation.
The pump partner is active in control
mode.
WILO SE 2022-05
Publicité
