INSORB 2030 Mode D'emploi page 32

Certifications: Not made with natural rubber latex. Not made with PVC or plasticizers used in PVC, like Di(2-ethylhexyl)phthalate (DEHP).
Not made with substances of Very High Concern (SVHC) per REACH (EC) No 1907/2006 (ECHA)
Not made with medicinal products. Not made with human blood derivatives. Not made with animal derived materials.
Caution: Rx ONLY - Federal (USA) law restricts this device to sale, distribution, and use by or on the order of, a physician.
NEEDLESTICK SAFETY:
The INSORB Stapler complies with the Needlestick Safety and Prevention Act as a U.S. OSHA-defined SESIP (sharps with engineered sharps injury protections).
The INSORB Stapler's built-in safety features effectively reduce the risk of an exposure incident. The Bloodborne Pathogens Standard clarifies the need for
employers to select safer needle devices and to involve employees in identifying and selecting these devices.
Manufactured By:
Incisive Surgical, Inc.
a wholly owned subsidiary of CooperSurgical, Inc.
95 Corporate Drive
Trumbull, CT 06611 USA
Phone: (800) 243-2974
Fax (800) 262-0105
International
Phone: +1 (203) 601-9818
Fax +1 (203) 601-4747
www.coopersurgical.com
Date of Issue: P/N: LA002030
March 2019 Revision A
Horizontal, Subcuticular, Absorbable Staples
placed at 7mm intervals
EC REP
Authorized Representative:
MPS Medical Product Service GmbH
Borngasse 20
35619 Braunfels Germany
49-6442-932673