Femi XXX EVO ALU Instructions Pour L'utilisation Et L'entretien page 45

5.4. CHECKS
Every day
1) Check that the power cable is in tact.
2) Check that all guards are intact.
3) Check that the blade is intact and shows no signs of wear.
4) Check that the blade stops within 10 seconds of the button being released.
5) Check that the arm spring allows the arm to go back up to the mechanical stopper within
a maximum time of 2 seconds.
5.5. STORAGE OF THE MACHINE WHEN NOT IN USE
When the machine is not in use, place it in bench saw mode (Fig. 1B) and place the machine
in safety conditions as described in the heading "GENERAL SAFETY REGULATIONS".
5.6. ASSISTANCE
If the intervention of expert personnel is required to perform extraordinary maintenance
operations or repairs, always contact an authorized after sales service.
5.7. DISPOSAL OF THE MACHINE, PACKAGING AND MATERIALS PRODUCED BY
MAINTENANCE OPERATIONS
The machine and its packaging are made from 100% recyclable materials.
The electrical and electronic components (indicated by a crossed out wheelie bin symbol) must
be disposed of in accordance with Directive 2002/96EC.
EN
39