Femi XXX EVO ALU Instructions Pour L'utilisation Et L'entretien page 34

EN
Entanglement, drawing-in and entrapment hazard:
This risk is due to the presence of the rotating blade when the machine is used as a mitre saw
or bench saw. It is indicated by the symbol:
Precautions to be taken
• During the cutting phase do not wear work gloves.
• Keep hands away from the work area.
• Never remove cuttings or fragments from the machine when the blade is rotating.
Crushing hazard:
This risk is present in the cutting head rotation area (when the machine is in mitre saw mode)
during the adjustment phase of passing from vertical cutting to oblique cutting. The risk is
identifi ed by the symbol:
Precautions to be taken
Keep hands away from the head rotation area.
1.8. INFORMATION CONCERNING NOISE AND VIBRATIONS
Noise
NOTES
For information on noise emissions, please refer to the relative document provided as an
appendix to this manual.
The noise values indicated are emission levels and not necessarily safe operating levels. While
there is a correlation between emission levels and exposure levels, this cannot reliably be used
to determine whether or not further safety precautions are needed.
Factors which infl uence the real level of a worker's exposure include the duration of exposure,
the characteristics of the working environment, other sources of noise, for example the number
of machines or operations being carried out in the near vicinity. Furthermore, levels of safe
exposure may be fi xed differently from one country to another.
This information does however help the machine user to better assess the hazards and
risks.
DANGER - WARNING
IT IS ADVISABLE TO USE SUITABLE HEARING PROTECTION SUCH AS EARMUFFS
OR EAR PLUGS ESPECIALLY WHEN CUTTING ALUMINIUM!
Vibrations
The mean frequency-weighted r.m.s. hand-arm acceleration value in normal cutting conditions
using correctly sharpened blades, is less than 2.5 m/s
Test measurements were carried out in accordance with Standards EN ISO 5349-1 and EN
ISO 5349-2.
28
.
2
Cont....