Publicité
Les langues disponibles
Les langues disponibles
EN
-
Never leave tools or measuring devices on the machine.
-
Adopt safe working methods. Whenever possible use clamps and vices to hold the workpiece
steady. This is far safer than using just your hands.
-
Unplug the machine from the power supply when it is not in use, before performing any
maintenance operations and before replacing accessories or tools such as blades, tips,
milling cutters, etc..
Safety checks:
-
Connect the dust collection system (optional extra). If dust collection systems are envisaged,
make sure the relative devices are connected and used correctly.
-
Remove the adjustment pins and spanners. It is a good rule to check that adjustment
spanners have been removed from the machine before switching it on.
-
Avoid inadvertent start-up: make sure that the switch is in the stop position before connecting
the machine to the power supply.
-
Check the various machine elements to make sure there are no signs of damage.
-
Before proceeding to use the machine, check all the safety devices and any other item
which may be damaged to ensure that the machine works properly and can perform the
task it is designed to do.
-
Check that mobile parts are well aligned, move smoothly and are intact.
-
Check the mounting and any other condition which may infl uence operation. Any damaged
part or guard must be repaired or replaced at an authorized after sales service centre.
-
It is essential to avoid using the machine if the switch malfunctions in any way.
-
It is strictly forbidden to use the circular saw without the blade safety guard in place.
-
Do not force the machine. The end results will be better and the machine safer to use if it
is used at the speed and rhythm it was designed for.
Machine upkeep and maintenance:
-
Always keep the handles and handgrips dry, clean and free from oil and grease.
-
Keep the blades in good condition. Keep tools sharp and clean to ensure maximum
performance and safety.
DANGER - WARNING
• THE USE OF ANY ACCESSORY OR CONNECTION DIFFERENT TO THOSE
INDICATED IN THIS MANUAL MAY LEAD TO THE RISK OF INJURY.
• DO NOT DISASSEMBLE THE MACHINE:
REPAIRS TO THE MACHINE MUST BE CARRIED OUT BY SKILLED PERSONNEL
ONLY. FAILURE TO OBSERVE THIS INDICATION COULD CREATE GRAVE
DANGER TO USERS.
DANGER - CAUTION
Always use original spare parts to guarantee correct and safe operation.
26
Cont....
Publicité
