Preparing The Telephone; Checking The Package Contents; Connecting The Base Unit - switel POWERTEL TF 520 Mode D'emploi

2 Preparing the Telephone

Safety information
Attention: It is essential to read the Safety Information in
Chapter 1 before starting up.

Checking the package contents

The package contains:
Content
Base unit
Power adapter plug
Receiver
Helix cable for receiver
Emergency call unit with wrist strap and
neckband (splashproof)
Telephone connection cable
Batteries, type AA 6 V
Battery, type A23 12 V
(installed in emergency call unit)
Wall installation bracket
Operating manual
Your device is supplied with an energy−efficient switching power supply
(Input 230 V , Output 9 V
AC DC
load is approx. 0.1 W. The average efficiency is > 68.46 %. The electrical
consumption is max. 3.91 W.
65
TF 520
1
1
1
1
1
1
4
1
1
1
Important note
, 300 mA). The adaptor input power without

Connecting the base unit

Connect the telephone as illustrated in the diagram. For reasons of safety,
only use the power adapter plug and telephone connection cable supplied.
Mains power outlet
The telephone can be operated with or without the power adapter
plug. If you want to operate the telephone without the power
adapter plug, ensure that sufficiently charged batteries of the cor-
rect type are properly installed.
Preparing the Telephone
Receiver connection
Telephone line socket
71