Preparing The Telephone; Operating Elements - switel CCT 507 Mode D'emploi

Preparing the Telephone

2
Safety information
Checking the package contents
The package contains:
− a telephone
− a telephone connection cable
− a receiver
Connecting the telephone
Connect the telephone as illustrated in the diagram. For reasons of sa-
fety, only use the power adapter plug and telephone connection line
supplied.
Mains power outlet
Connecting the receiver
Plug one end of the coil cable in the socket on the bottom end of the re-
ceiver. Then plug the other end in the socket on the left−hand side of the
telephone.

Operating Elements

3
The buttons in this operating manual are subsequently depicted with a
uniform contour. Therefore, slight deviations in the appearance of the
symbols on the telephone buttons compared to those depicted here are
possible.
Preparing the Telephone
Attention: It is essential to read the Safety Information in
Chapter 1 before starting up.
44
− a coil cable
− a power adapter plug
− an operating manual
Telephone line socket
63