Initial Operation - Grizzly Tools BRM 56-163 BSA Q-360 Traduction De La Notice D'utilisation Originale

and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge if
they have been given supervi-
sion or instruction concerning
use of the appliance in a safe
way and understand the haz-
ards involved. Children shall
not play with the appliance.
Cleaning and user mainte-
nance shall not be made by
children without supervision.
• To charge the battery, use only
the charger supplied. Risk of
fire and explosion. This en-
sures that the safety of the de-
vice is maintained.
• Before each use, check the
charger, cable and plug and
have them repaired by quali-
fied professionals and only with
original parts. Do not use a de-
fective charger and do not open
it up yourself. This ensures
that the safety of the device is
maintained.
• Connect the charger only to a
socket with an earth. Ensure
that the mains voltage matches
the specifications on the charg-
er rating plate. Risk of electric
shock.
• Disconnect the charger from
the mains before closing or
opening connection to the bat-
tery / power tool / device. This
ensures that the battery and
charger are not damaged.
• Keep the charger clean and
away from wet and rain. Do not
use the charger outdoors. Dirt
and the entry of water increase
the risk of electric shock.
• Operate the charger only with
the appropriate original batter-
ies. Charging other batteries
may result in injuries and risk of
fire
• Avoid mechanical damage to
the charger. This can result in
internal short circuits.
• The charger must not be oper-
ated on or in the immediate
vicinity of flammable surfaces
(e.g. paper, textiles). Risk of
fire due to heating caused by
charging.
• If the power cable for this
equipment is damaged, it must
be replaced by the manufac-
turer, a customer service agent
of the same or a similarly quali-
fied person in order to prevent
hazards.

Initial Operation

Caution! Risk of injury from
rotating blades. Carry out work
on the equipment only when the
blade is switched off and sta-
tionary.
Observe the Briggs & Stratton in-
struction manual supplied.
Before starting the equipment, you must
- Remove the Protective Caps
- Install the handle bar
- Install the grass collection box
- Charge the battery
- Fill with engine oil
- Fill with petrol
- adjust cutting height if required
GB
99