Burkert 2006 Mode D'emploi page 5

Vanne à siège droit 3/2 voies
Masquer les pouces Voir aussi pour 2006:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Basic Safety Instructions
Danger due to loud noises.
▶ Depending on the operating conditions, the device may generate
loud noises. More detailed information on the likelihood of loud
noises is available from the relevant sales office.
▶ Wear hearing protection when in the vicinity of the device.
Leaking medium when the packing gland is worn.
▶ Regularly check relief bore for leaking medium.
▶ If medium is leaking out of the relief bore, change the packing
gland.
▶ If the media is hazardous, protect the area surrounding the
discharge point against dangers.
General hazardous situations.
To prevent injury, ensure that:
▶ That the system cannot be activated unintentionally.
▶ Installation and repair work may be carried out by authorized
technicians only and with the appropriate tools.
▶ After an interruption, ensure that the process is restarted in a
controlled manner. Observe sequence.
1. Apply supply voltage.
2. Charge the device with medium.
▶ The device may be operated only when in perfect condition
and in consideration of the operating instructions.
▶ Observe the safety regulations specific to the plant for applica-
tion planning and operation of the device.
▶ The plant operator is responsible for the safe operation and
handling of the plant.
▶ The general rules of technology apply to application planning
and operation of the device.
Type 2006
To prevent damage to property of the device, ensure:
▶ Supply the media connections only with those media which
are specified as flow media in the chapter entitled "5 Techni-
cal Data".
▶ Do not put any loads on the valve (e.g. by placing objects on
it or standing on it).
▶ Do not make any external modifications to the valves. Do not
paint the body parts or screws.
▶ Do not transport, install or remove heavy devices without the aid
of a second person and using suitable auxiliary equipment.
▶ The exhaust air may be contaminated with lubricants in the
actuator.
The globe valve type 2006 was developed with due con-
sideration given to accepted safety rules and is state-of-
the-art. However, dangers can still arise.
english
5

Publicité

Table des Matières
loading

Table des Matières