Insert the end of the lance extension completely
into the handle (A) and secure it with a quarter
turn (B). Then fasten the connection by tightening
the coupling nut. See diagram 1.
Fasten the jet lance to the lance extension by
inserting the end of the jet lance completely into
the lance extension and securing it with a quarter
turn.
The
Force
1400 also
standard, which can be used instead of the normal
jet lance if desired.
Connect the handle to the high-pressure hose. See
diagram 2.
Connect the high-pressure hose to the water inlet
of the machine.
Fasten the female quick-lock to the water supply
hose and then connect them to the water inlet of
the machine. The (not supplied) water supply hose must have a minimum
diameter of 13 mm (1/2") and be reinforced.
Attention!
The water supply must supply at least the water consumption of the machine
(330 l/h)! The pump must always be supplied with sufficient water. 'Dry
operation' causes damage.
The water temperature may not exceed 40°C. The pressure of the water
supplied may not exceed 0.7 MPA (7 bar).
Only use clean water with this machine. Impurities or aggressive chemicals
damage the machine!
Operation
Turn the On/Off switch to the OFF/O (Off) position.
Check that the specifications of the socket that you wish to use correspond with
those on the type plate of the machine. If this is the case, insert the plug into
the socket.
Open the water supply completely.
Unlock the safety lock under the handle.
Now squeeze the trigger for several seconds in order to de-aerate the hose.
Switch the machine on by switching the On/Off button to I/ON. The motor will
start briefly, but will stop again as long as the trigger is not squeezed.
Now squeeze the trigger – the machine will start.
The automatic start/stop system means that the motor only works when
the trigger is squeezed.
The jet produced by the jet lance can be adjusted from narrow to wide by
turning the head of the lance. Never do this while spraying!
The turbo-lance (Force 1400) creates a narrow rotating jet.
has a
turbo-lance
28
as