Publicité
Les langues disponibles
Les langues disponibles
Suggested infohub
Suggested installation locations for each type of standby
generator are shown on the following pages.
Use the illustrations as a guide when mounting the interface
board (E) and cellular unit (G). In some instances, the
interface board needs to be mounted in the area behind the
control panel to enable wires to reach. This will be noted in
such instances.
The following illustrations are representative. Your model of
generator may differ.
For models equipped with this control panel:
Figure 10
Air-Cooled Horizontal Standby Generators
Mount (E) behind control panel to allow wires to reach.
E
G
Figure 11
* For liquid cooled horizontal standby generators refer to figure 17 on page 10
Installation Locations
™
Air-Cooled Vertical Standby Generators
Mount (E) behind control panel to allow wires to reach.
Figure 12
Air-Cooled Vertical Standby Generators
Figure 13
E
G
E
G
9
Publicité
