Publicité
Les langues disponibles
Les langues disponibles
Mount Interface Board
Clean the mounting surface for the interface board with an
alcohol wipe or other cleaning solution. Peel the covering
from the adhesive strip on the back of the board, then
firmly press the board in place. See pages 9 and 10 for
recommended location.
Mount Cellular Unit
Clean the mounting surface for the cellular unit with an
alcohol wipe or other cleaning solution. Peel the covering
from the adhesive strip on the back of the unit, then firmly
press the unit in place. Connect the antenna cable at this
time. See pages 9 and 10 for recommended location.
Close Generator and Install Fuses
1. Use the supplied wire ties to organize the harness wires
and to secure excess wire lengths.
2. Reinstall the control panel and secure with screws.
3. Reinstall the control box front and secure with screws.
4. Connect negative battery cable to negative battery
terminal, indicated by NEGATIVE, NEG, or (-).
5. Reinstall the fuses into the transfer switch.
6. Reinstall the 15 Amp fuse in control panel.
7. Set generator circuit breaker to ON.
8. Set generator system switch to AUTO.
Registration and Activation
Access to the InfoHub user portal requires purchase of a
subscription. You must register and activate the InfoHub
system online at www.infohubsp.com. User guides and
instructional videos are available at this site.
You will be required to read and comply with the InfoHub
Subscription Service Agreement prior to activation of the
monthly subscription, and the Terms of Use and Privacy
Policy prior to accessing the InfoHub portal. Visit www.
briggsinfohub.com to preview those policies.
For registration and activation support, call the InfoHub
support team at 1-833-463-6482.
Prior to installation, record the module ESN and P/N in
the spaces below. This information is required to correctly
assign the module to the equipment in the user portal.
InfoHub
ESN:
P/N:
Equipment
Brand:
Equipment Type:
Model Number:
Serial Number
Minimum System Requirements - User
Portal
Supported Browsers and Versions
•
Chrome - Version 59.0+
•
Firefox - Version 54.0+
•
Safari - Version 10.0+
•
IE - Version 11.0+
•
Edge - Version 15.0+
Minimum Display Resolution
•
1280 x 720
Computer Requirements
•
Intel® Core™ i3 or equivalent
•
4GB of RAM
•
Internet access
Special Settings
•
Pop-ups are required for reporting.
•
URL used for iFrame tool must support iFrames.
7
Publicité
