FOR USE OF BATTERIES
a) CAUTION! Danger of explosion if
batteries are incorrectly replaced.
Replace only with the same or equiv-
alent type. Observe correct polarity.
b) Batteries (battery pack or batteries
installed) shall not be exposed to ex-
cessive heat such as sunshine, fire
or the like. Protect from mechanical
shock. Keep dry and clean. Keep
away from children.
c) Do not open, dismantle, shred or
short-circuit batteries. Do not mix
old and new batteries.
d) Dispose of properly. Pay attention
to environmental aspects of battery
disposal. Do not dispose of in house-
hold waste.
e) Refer to safety and other instruc-
tions on the battery or its packaging.
f) In case of battery leakage, remove
the batteries and clean the battery
compartment thoroughly. Avoid con-
tact with skin and eyes.
170
EN
Intended use
The tool is designed for longitudinal cutting of
solid wood, wood-like materials and plastics
when equipped with appropriate saw blades,
or, when connected to a suitable dust ex-
traction system, for waterless cutting of tiles
with the respective cutting wheel (art.-nr:
5527692). The tool is not intended for com-
mercial use.
Any other use or modification to the tool is
considered as improper use. The producer is
not responsible for any damage or injuries that
may result of it.
Improper use
Do not use this circular saw
•
for cutting fire wood
•
for cutting iron and other metal
•
for cuts using a grinding wheel
•
for grinding using a sanding sheet
•
as a transportable or stationary tool
Risk of injuries.
The user is responsible for all damages and
injuries arising from improper use.
Use of accessories other than original parts
voids the manufacturer's warranty.
Saw blades
Ø85x Ø10x1,6 20T
for
20 dents HW
wood
Ø85x Ø10x1,6 80T
for soft
80 dents SP
metal
EN
171