Layout And Items Supplied; Proper Use; Technical Data - Pattfield Ergo Tools PE-AA 18 Li Basic Traduction De La Notice Originale

2. Layout and items supplied

2.1 Layout (Fig. 1/2)
1 On/Off switch
2 Locking button for On/Off switch
3 Soleplate
4 Blade holder
5 Branch jaw clamp
6 Saw blade
2.2 Items supplied
Please check that the article is complete as spe-
cifi ed in the scope of delivery. If parts are missing,
please contact our service center or the sales
outlet where you made your purchase at the latest
within 5 working days after purchasing the product
and upon presentation of a valid bill of purchase.
Also, refer to the warranty table in the service in-
formation at the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Cordless tree pruning saw
•
Saw blade for wood (1x)
•
Original operating instructions

3. Proper use

The universal saw is designed for sawing wood,
iron, non-ferrous metals and plastics using the
appropriate saw blades.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Anl_PE_AA_18_Li_Basic_SPK7.indb 113 Anl_PE_AA_18_Li_Basic_SPK7.indb 113
GB
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Motor power supply: ............................... 18 V DC
Stroke speed: .............................1500-2800 min
Stroke height: ............................................ 20 mm
Cutting depth without branch jaw clamp: ... 90 mm
Cutting depth with branch jaw clamp: ........ 70 mm
Maximum saw blade width: ...................... 1.6 mm
Weight: ........................................................1.2 kg
Caution!
The charging unit is allowed to be used only for
the lithium-ion batteries of the Power-X-Change
series!
Power-X-Change
•
18 V, 1.5 Ah, 5 lithium-ion cells
•
18 V, 2.0 Ah, 5 lithium-ion cells
•
18 V, 3.0 Ah, 10 lithium-ion cells
•
18 V, 4.0 Ah, 10 lithium-ion cells
•
18 V, 5.2 Ah, 10 lithium-ion cells
Danger!
Sound and vibration
Sound and vibration values were measured in ac-
cordance with EN 60745.
L sound pressure level ..................... 73,9 dB(A)
pA
L Measured sound power level ....... 84,9 dB(A)
WA
K uncertainty ................................................ 3 dB
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
- 113 -
-1
= 21,251 m/s
2
h
2
24.11.2017 09:29:03 24.11.2017 09:29:03