Proper Use; Technical Data - Pattfield Ergo Tools E-HKS 1600-Laser Mode D'emploi D'origine

Anleitung_E_HKS_1600_Laser_SPK7__ 27.02.13 09:54 Seite 14
GB
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
Hand-held Circular Saw
n
Saw blade
n
Allen key
n
Original operating instructions
n
Safety instructions
n

3. Proper use

The hand-held circular saw is designed for sawing
straight cuts in wood, wood-type materials and
plastics. When working, be careful not to overheat
the tips of the saw blade and melt the plastic.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
14

4. Technical data

Voltage 220-240 V ~ 50 Hz
Power rating
Idle speed
Cutting depth at 0°
Cutting depth at 45°
Saw blade 190 mm dia.
Saw blade mount 20 mm dia.
Saw blade thickness
Double isolation
Weight
Laser class
Laser wave length
Laser output
Laser power supply: 2 x 1.5V (AAA)
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level 97,1 dB(A)
pA
K uncertainty
pA
L sound power level 108,1 dB(A)
WA
K uncertainty
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values determined in accordance with
EN 60745.
Vibration emission value a ≤ 2,5 m/s 2
h
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equipment
is used and may exceed the specified value in
exceptional circumstances.
1500 W
4500 rpm
66 mm
44 mm
2.8 mm
II /
4.7 kg
2
650 nm
≤ 1 mW
3 dB
3 dB