Installation Des Panneaux Vitrés Intérieurs Noirs - Regency City Serie Manuel D'installation Et D'utilisation

installation - panneaux, barrières, façades
MISE EN GARDE : Risque de cancer et de malforma-
!
tions congénitales
www.P65Warnings.ca.gov
Installation des panneaux vitrés intérieurs noirs (Pièce n
Part # - 919-874-fr
INSTALLATION DES PANNEAUX VITRÉS INTÉRIEURS NOIRS (PIÈCE N
Description: Prop. 65 Short form label
Date: May 30/18
1. Couper le gaz et l'alimentation électrique vers l'appareil et le laisser
Colour: Black font on white
refroidir à température ambiante. Retirer l'écran de sécurité et la
Size: 5"W x 0.7"H
vitre de la chambre de combustion sur un côté seulement (côté
accessible) — Voir le manuel pour les consignes.
Remarque : Les vis qui doivent fixer toutes les attaches mentionnées
dans ces consignes sont déjà sur l'appareil. Les retirer simple-
ment et les réinstaller.
2. Identifier les panneaux et leur ordre d'installation.
6
4
6
1
1
3
5
1
2
5 2
N Qté Description
o
1 6 panneau vitré de 20 po x 2-3/16 po
2 6 panneau en acier de 20 po x 2-3/16 po
3RD ANGLE
PROJECTION
3 2 panneau en acier de 6-3/4 po x 2-1/4 po
DO NOT SCALE
DRAWING
4 1 panneau vitré de 17-3/4 po x 11-1/8 po UNITS IN INCHES
5 4 panneau combiné de 20 po x 4-3/8 po
6 2 panneau combiné de 17-15/16 po x 4-7/8 po
7 2 panneau combiné de 25-1/2 po x 4-3/8 po
8 1 panneau combiné de 13-3/8 po x 4-3/4 po
2
2
3. Placer les six panneaux intérieurs n
bustion, 3 de chaque côté du brûleur comme indiqué ci-dessous.
4. Placer les six panneaux vitrés intérieurs n
se situer sur les panneaux en acier. Installer les deux panneaux
latéraux en acier n o 3 à l'extrémité du brûleur.
106 | City Series CP60E
920-476-fr
919-874-fr
5
5
1
2
1
2
2
1
3
2
7
TOLERANCES UNLESS
FIREPLACE PRODUCTS
MAT'L :
OTHERWISE STATED
INTERNATIONAL
DIMENSIONS
PROCESS :
0.000 = 0.01 CRITICAL
1:16
SCALE: PART :
0.000 = SPECIFIED TOLERANCE
0.000 = 0.031
MEDRALIN 10/21/2021
DWN: DATE:
0.000 REF = REFERENCE ONLY
ANGULAR = 1
E.C.N.: SIGN: DATE:
THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT OUR PRIOR WRITTEN CONSENT.
2
2
2
2
o 2 dans la chambre de com-
1. Ces panneaux doivent
o
3RD ANGLE TOLERANCES UNLESS
PROJECTION OTHERWISE STATED
DIMENSIONS
0.000 = 0.01 CRITICAL
0.000 = SPECIFIED TOLERANCE
DO NOT SCALE
0.000 = 0.031
DRAWING
0.000 REF = REFERENCE ONLY
UNITS IN INCHES ANGULAR = 1
THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT OUR PRIOR WRITTEN CONSENT.
5. Installer le support latéral inférieur.
A
7
8
3RD ANGLE TOLERANCES UNLESS
6. Faire glisser le panneau vitré latéral n
PROJECTION OTHERWISE STATED
DIMENSIONS
inférieur. 0.000 = 0.01 CRITICAL
0.000 = SPECIFIED TOLERANCE
DO NOT SCALE
0.000 = 0.031
DRAWING
0.000 REF = REFERENCE ONLY
UNITS IN INCHES ANGULAR = 1
THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT OUR PRIOR WRITTEN CONSENT.
-
SHEAR/ PUNCH/ FORM
CP60 GLASS PANEL ASSEMBLY
PART NO: REV:
457-522
-
7. Fixer la vitre latérale en montant le support supérieur, puis serrer
les deux vis.
FIREPLACE PRODUCTS -
MAT'L :
INTERNATIONAL
SHEAR/ PUNCH/ FORM
PROCESS :
1:16 CP60 GLASS PANEL ASSEMBLY
SCALE: PART :
10/21/2021
MEDRALIN
PART NO:
DWN: DATE:
457-522
E.C.N.: SIGN: DATE:
8. Nettoyer les panneaux à l'aide d'un linge. Ajouter les éléments déco-
ratifs ou les bûches souhaités avant d'installer la vitre intérieure de
la chambre de combustion. Pour installer la vitre de la chambre de
combustion, voir le présent manuel pour les consignes.
1
CITY SERIES
457-906)
o
457-906)
O
DETAIL A
SCALE 1 : 8
FIREPLACE PRODUCTS -
MAT'L : 4 dans le support latéral
o
INTERNATIONAL
SHEAR/ PUNCH/ FORM
PROCESS :
1:24 CP60 MAIN ASSEMBLY
SCALE: PART :
11/24/2021
PART NO:
DWN: DATE:
457-500
E.C.N.: SIGN: DATE:
B
B
3RD ANGLE TOLERANCES UNLESS
PROJECTION OTHERWISE STATED
DIMENSIONS
0.000 = 0.01 CRITICAL
0.000 = SPECIFIED TOLERANCE
3RD ANGLE DO NOT SCALE TOLERANCES UNLESS
FIREPLACE PRODUCTS
0.000 = 0.031
PROJECTION OTHERWISE STATED
DRAWING
INTERNATIONAL
DIMENSIONS 0.000 REF = REFERENCE ONLY
0.000 = 0.01 CRITICAL
UNITS IN INCHES ANGULAR = 1
1:24
SCALE:
0.000 = SPECIFIED TOLERANCE
DO NOT SCALE
0.000 = 0.031 THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT OUR PRIOR WRI
DRAWING
DWN:
0.000 REF = REFERENCE ONLY
UNITS IN INCHES ANGULAR = 1
E.C.N.: SIGN:
THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT OUR PRIOR WRITTEN CONSENT.
C
C
REV:
-
3RD ANGLE TOLERANCES UNLESS
FIREPLACE PRODUCTS
PROJECTION OTHERWISE STATED
INTERNATIONAL
DIMENSIONS
3RD ANGLE TOLERANCES UNLESS
0.000 = 0.01 CRITICAL
1:24
SCALE:
PROJECTION 0.000 = SPECIFIED TOLERANCE OTHERWISE STATED
DO NOT SCALE
0.000 = 0.031
DRAWING DIMENSIONS
DWN:
0.000 REF = REFERENCE ONLY
UNITS IN INCHES ANGULAR = 1 0.000 = 0.01 CRITICAL
E.C.N.:
THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT OUR PRIOR WRITTEN CONSENT. 0.000 = SPECIFIED TOLERANCE
DO NOT SCALE
0.000 = 0.031
DRAWING
0.000 REF = REFERENCE ONLY
UNITS IN INCHES ANGULAR = 1
THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT O
A
REV:
-
3RD ANGLE TOLERANCES UNLESS
PROJECTION OTHERWISE STATED
DIMENSIONS
0.000 = 0.01 CRITICAL
0.000 = SPECIFIED TOLERANCE
DO NOT SCALE
0.000 = 0.031
DRAWING
0.000 REF = REFERENCE ONLY
UNITS IN INCHES ANGULAR = 1
THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY N
DETAIL B
SCALE 1 : 8
DETAIL B
SCALE 1 : 8
FIREPLACE PRODUCTS -
MAT'L :
INTERNATIONAL
SHEAR/ PUNCH/ FORM
PROCESS :
1:24 CP60 MAIN ASSEMBLY
SCALE: PART :
-
MAT'L :
11/24/2021
PART NO:
DWN: SHEAR/ PUNCH/ FORM DATE:
PROCESS : 457-500
CP60 MAIN ASSEMBLY DATE:
E.C.N.: SIGN:
PART :
11/24/2021
PART NO: REV:
DATE:
457-500
-
DATE:
DETAIL C
SCALE 1 : 8
DETAIL C
SCALE 1 : 8
-
MAT'L :
SHEAR/ PUNCH/ FORM
PROCESS :
FIREPLACE PRODUCTS -
MAT'L :
CP60 MAIN ASSEMBLY
PART :
INTERNATIONAL
SHEAR/ PUNC
11/24/2021
PART NO: REV:
PROCESS :
DATE:
457-500
-
DATE:
SIGN: 1:24
CP60 MAIN ASSE
SCALE: PART :
11/24/2021
DWN: DATE:
E.C.N.: SIGN: DATE:
12.22.21
S
D
E
PART NO:
457-50