Publicité
Les langues disponibles
Les langues disponibles
================================================================================================
STEP 5-A
(Continued)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Beneath the cart A-frame, start to add
two 5/16" lock washers (15) and 5/16"
nuts (13) on the outside edges of the
tray and plates.
DO NOT tighten
the nuts (13) fully YET.
STEP 5-B
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Find this hardware:
- x2 Bolt; Carriage (18) - 5/16" x 1"
- x2 Washer; Lock (15) - 5/16"
- x2 Nut; Hex Head (13) - 5/16"
Align holes of the Left Pivot Arm (2)
with the A-frame.
NOTE: Hooks of the Pivot Arms will
face toward center of the cart.
Add both carriage bolts (18) to the Pivot Arm (2)
and A-Frame as illustrated here.
Beneath the cart A-frame, start to add two 5/16"
lock washers (15) and 5/16" nuts (13) on the
outside edges of the tray and plates.
DO NOT tighten
the nuts (13) fully YET.
English Manual
ASSEMBLY
15
13
2
15
13
9
15
13
18
18
18
15
13
15
13
1018671-A
Publicité
