Brinly FDK-10BH Manuel Du Propriétaire page 12

================================================================================================
STEP 7
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1. Lay the cart bed down.
2. Hook one end of the spring (17) through the hole of
the Rocker Motion Bracket (7) as illustrated here.
3. Expanding the spring (17), pull to hook
the other end through the small
center hole along the edge of the
Base Plate Rocker (1).
STEP 8-A
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Lift the motion bracket (7) up and over
the first set of extended arms of the
base plate (1).
Align the two rocker parts:
- x1 Base Plate (1)
- x1 Motion Bracket (7)
Slide two bushings (10) in
place as illustrated.
English Manual
ASSEMBLY
1
1
10
12
1
7
7
10
7
17
17
1018671-A