INSTRUCTIONS FOR USE
Step 13:
Adjust neck to neutral position
(2-person operation)
a. First person must support patient's
head while second person releases
ball joint.
b. Position as desired.
c. Lock ball joint securely.
Step 14:
Intraoperative adjustments
a. Disconnect intubation tube and feed through opening in mask and Head
Positioner.
b. Fold mirror down for suction.
c. Release latches and shift Head Positioner after Spine System articulations.
Device controls and indicators:
Controls and indicators of this device are described within the Setup instructions.
Storage, Handling and Removal Instructions:
3.4.1
Storage and Handling:
The product should be stored in a clean and safe environment to prevent product
damage.
3.4.2
Removal Instruction:
1. Push the white clamp locks down to unlock.
2. Pull up firmly on the clamp latches to release.
3. Ensure both latches are released during removal.
Troubleshooting Guide:
This device does not have a troubleshooting guide. For technical support user of
the device shall first contact his or her supplier.
Document Number: 80028280
Version: B
Page 15
Issue Date: 25 MAR 2020
Ref Blank Template: 80025118 Ver. E