Inhibition Of Commands (With The Remote Control) - Portalp DIVA Notice Utilisateur

1
Inhibition of commands and adjustments
(can be carried out with the remote control)
The remote control can be used to lock the various adjustments made to the
DIVA door.
It is then impossible for a third party to modify them: the remote control or the
keys of the control panel are then "locked" or inhibited" (however, the "locking",
"unlocking" and "anti-panic" functions are still operational).
Inhibiting commands
1/ Press the CODE key and hold it down until the end
of the operation
2/ Press the key :
The XX-0 message is displayed, indicating that your
door is ready to receive your personal code.
3/ Enter the four figures of your personal code.
A long tone confirms that your code has been
recognized and that your door will accept no further
modifications to its adjustments.
4/ Release the CODE key
Validation of commands and adjustments
Repeat the same operation as above (inhibition of
commands).
You can then modify the different parameters of your
door with the remote control or with the keys of the
control panel.
60