Portalp DIVA Notice Utilisateur page 43

1
Choice of Operating Mode
Your DIVA door offers six operating modes enabling the operator
to control the movements of customers and individual
requirements (domestic needs) to be met. The mode selected
remains displayed on the control panel.
1. By using the Remote Control
Press the corresponding button, the selected mode will be
displayed in the mode window of the remote control.
2. By using the Control Panel
Press the "MODE" pushbutton until the
desired mode is displayed.
3. List of the various door "MODES"
(1)
Locking : The lock will operate as soon as the door is completely closed in
Closed* , Entry* and Exit modes.
The "-b" displayed in the adjustment window confirms that the lock has been
correctly activated.
38
- Automatic : Entry* and Exit are allowed.
The door will close again after interval T1.
(adjusted on the control panel and by remote
control).
(1) The door closes as soon as its passage way is
- Closed : *
free of obstacles. Entry and exit are then not
allowed.
(1) Only the entry is allowed. Exit is not allowed
- Entry : *
once the door has closed again.
(1)
Only the exit is allowed. Entry is not allowed
- Exit : *
once the door has closed again.
- Open : The door sets itself at the opening you have
selected,
display (GO, PO, OS), and remains open (see
settings for openings).
- Manual : Also known as "Free mode". In this case, the
door can be opened or closed by pushing the
door leaves manually. This mode is used to
make the doors easier to clean or in the event of
a malfunction.
MODE WINDOW
PUSHBUTTON
which is displayed in the selection
(1)
(1)
(1)