How To Modify Your Personal Code - Portalp DIVA Notice Utilisateur

1

How to modify your personal code

1/ Press the CODE key and hold it down until the end
of the operation. The selection window displays the
programmed opening.
2/ Press the key :
The XX-0 message displayed in the selection
window indicates that the door is ready to receive
your "current code".
3/ Enter the 1st figure of your code ; the XX-1
message is displayed
4/ Enter the 2nd figure of your code ; the XX-2
message is displayed
5/ Enter the 3rd figure of your code ; the XX-3
message is displayed
6/ Enter the 4th figure of your code. A long tone is
emitted and the YY-0 message confirms the
recognition of your "current code" and that your door
is ready to learn your "new code".
7/ Enter the 1st figure of your new code; the YY-l
message is displayed.
8/ Enter the 2nd figure of your new code; the YY-2
message is displayed.
9/ Enter the 3rd figure of your new code; the YY-3
message is displayed.
10/ Enter the 4th figure of your new code. A long
tone is emitted which confirms that your new code
has been correctly memorized.
The adjustment window
selection window displays the new programmed
opening.
11/ Release the CODE key.
52
.
.
.
goes out and the