By Using The Remote Control - Portalp DIVA Notice Utilisateur

1

1. By using the remote control*

Use the remote control to lock the automatic door from the inside, if you use a
different access to enter and leave your premises.
Locking :
1/ Press the CODE key and hold it down until the end
of the operation.
2/ Press the key :
The selection window displays the XX-0 message.
3/ Enter the four figures of your personal code
On recognizing your personal code, the selection
window displays the "LK" message (Locked with
Key), your door closes, a long tone and the message
"-b" (mechanical blocking activated) displayed in the
adjustment window confirm that your electrical
locking has been correctly activated.
4/ Release the CODE key
Unlocking :
1/ Press the CODE key and hold it down until the end
of the operation.
2/ Press the key :
The selection window displays the XX-0 message.
3/ Enter the four figures of your personal code; a
long tone confirms recognition of the code. In the
selection window the "LK" message disappears and
the mode selected before locking is displayed again.
The message "-c" disappears and your door opens.
4/ Release the CODE key.
In the event of a power failure:
In the event of a power failure, see the section "Resetting by battery" before
using your remote control to lock or unlock your door.
54