Priority Commands - Portalp DIVA Notice Utilisateur

1

Priority Commands

The DIVA door can be forced open* or shut, whatever the mode displayed or
the detection orders defined. These commands thus have priority. They are
keys on the remote control, or permanent commands connected by your
installer.
Priority Opening :
Operates in all cases unless your door is locked with the key. Can be used to
assist a person with reduced mobility to pass through by delaying closing, to
force opening when in selective mode (Entry*, Exit, Closed*) or to deal
temporarily with a command malfunction.
The "Mode window" then displays the "PO" (Priority Opening) message.
NB : In this case, the open period is different from TO. It is set during
installation.
*Priority closing :
Generally used for security reasons, e.g. to prevent vandalism or assault.
Press the key (Priority closing).
The " PC " message (Priority Closing) is displayed in the selection window,
the door closes immediately with maximum pressure, and does not reopen if
there is an obstacle. (it emits preventive sounds)
Press the key (Priority Opening) to return to the previous mode or
select another mode as desired.
46