Endress+Hauser RIA452 Manuel De Mise En Service page 90

Technical data
CE mark
Ex approval
Other standards and guideli-
nes
90
10.0.8 Certificates and approvals
The device meets the legal requirements of the EU directives. Endress+Hauser confirms that the
device has been tested successfully by affixing the CE mark.
Information about currently available Ex versions (ATEX, FM, CSA, etc.) can be supplied by your
E+H Sales Centre on request. All explosion protection data are given in a separate documentation
which is available upon request.
• IEC 60529:
Degrees of protection by housing (IP code)
• IEC 61010-1:
Protection measures for electrical equipment for measurement, control, regulation and laboratory
procedures
• CSA 1010.1
Safety requirements for electrical equipment for measurement, control, and laboratory use -
General requirements
• FM 3610
Intrinsically safe apparatus and associated apparatus for use in class 1, 2 and 3, division 1 hazar-
dous (classified) locations
• CSA C22.2.157
Intrinsically safe & non-incendive equipment for use in hazardous locations
• CSA E79-11
Electrical apparatus for explosive gas atmospheres - intrinsic safety "i"
• EN 50020
Electrical apparatus for hazardous areas - intrinsic safety "I"
10.0.9 Documentation
System components - display unit, top-hat rail devices, overvoltage protection and energy com-
puter (FA016K/09/en)
Supplementary Ex documentation:
ATEX II(1)GD: XA 053R/09/a3
RIA452
Endress+Hauser