Publicité
Les langues disponibles
Les langues disponibles
2.4
Careful handling and use of the product
▶ Never leave the product unattended.
▶ Protect the product from frost.
▶ Clean the water level limiting device regularly with a brush, in accordance with the instructions,
and check it for signs of damage.
▶ When fitting the suction head on to the vacuum cleaner, take care to avoid pinching your fingers
or damaging the supply cord. This presents a risk of injury or damage.
▶ Check the product and its accessories for any damage. Guards, safety devices and any slightly
damaged parts must be checked carefully to ensure that they function faultlessly and as intended.
Check that moving parts function faultlessly, without sticking, and that no parts are damaged.
All parts must be fitted correctly and fulfill all conditions necessary for correct operation of the
product.
▶ Have your product repaired only by qualified, skilled personnel, using only genuine Hilti spare
parts. The safety of the product can thus be maintained.
▶ Always unplug the supply cord from the power outlet when the product is not in use (during
breaks), before cleaning and maintenance and before changing accessories or replacing the filter.
This precaution reduces the risk of the product starting accidentally.
▶ Never pull the vacuum cleaner by the supply cord to a new working position. Do not run the wheels
of the vacuum cleaner over the supply cord.
▶ Do not transport the product by crane.
▶ Do not deactivate the filter cleaning system when vacuuming up hazardous dusts, especially when
the appliance is used in combination with power tools that generate dust.
▶ Never leave the product unattended.
▶ Do not deactivate the filter cleaning system when vacuuming up hazardous dusts, especially when
the appliance is used in combination with power tools that generate dust.
▶ Protect the product from frost.
▶ Clean the water level limiting device regularly with a brush, in accordance with the instructions,
and check it for signs of damage.
▶ When fitting the suction head on to the vacuum cleaner, take care to avoid pinching your fingers
or damaging the supply cord. This presents a risk of injury or damage.
▶ Check the product and its accessories for any damage. Guards, safety devices and any slightly
damaged parts must be checked carefully to ensure that they function faultlessly and as intended.
Check that moving parts function faultlessly, without sticking, and that no parts are damaged.
All parts must be fitted correctly and fulfill all conditions necessary for correct operation of the
product.
▶ Have your product repaired only by qualified, skilled personnel, using only genuine Hilti spare
parts. The safety of the product can thus be maintained.
▶ Always unplug the supply cord from the power outlet when the product is not in use (during
breaks), before cleaning and maintenance and before changing accessories or replacing the filter.
This precaution reduces the risk of the product starting accidentally.
▶ Never pull the vacuum cleaner by the supply cord to a new working position. Do not run the wheels
of the vacuum cleaner over the supply cord.
2.5
Electrical safety
▶ The plug on the supply cord of the appliance must match the outlet. Do not change the plug in any
way. Do not use adapter plugs with earthed (grounded) appliances. Unmodified plugs and matching
outlets reduce risk of electric shock.
▶ Insert the plug in a suitable earthed/grounded power outlet which has been correctly and safely
installed and is in compliance with local regulations. If you are in doubt about the effectiveness of
the power outlet's earth/ground connection, have it checked by a qualified specialist.
▶ Avoid body contact with earthed / grounded surfaces such as pipes, radiators, cookers, stoves
and refrigerators. There is an increased risk of electric shock if your body is grounded.
▶ Do not expose the appliance to rain or wet conditions. Water entering an electric appliance will
increase the risk of electric shock.
▶ Check to ensure that the supply cord does not lie in a puddle of water.
▶ Check the appliance's supply cord at regular intervals and have it replaced by Hilti Service if
damage is found. Check extension cords at regular intervals and replace them if found to be
damaged.
*2333434*
2333434
English
3
Publicité
