General Information; Contact Address; Warranty; Informations In The Internet - Burkert 3003 Manuel D'utilisation

Generalinformation
4. general infOrmatiOn
4.1. contact address
germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: info@de.buerkert.com
international
Contact addresses are found on the final pages of this operating
manual.
And also on the Internet under: www.burkert.com
4.2.

Warranty

The warranty is only valid if the electromotive rotary actuator type
3003 is used as intended in accordance with the specified application
conditions.
4.3. informations in the internet
The operating manual and the data sheets on Type 3003 can be found
on the Internet under: www.burkert.com
Type 3003
5. system DescriptiOn
5.1. intended area of application
The electrical rotary OPEN/CLOSED actuator type 3003 (referred to
as rotary actuator in the following) is designed for ball or flap valves.
5.2. general description
Due to its modular construction, the basic device can be extended
with many options.
Options for expanding the basis device are found in chapter
"5.3. Options".
The rotary actuator is designed for direct or alternating current with a
varied rating and available for torques of 20, 35, 60 or 100 Nm. The
materials used guarantee maintenance-free operation and ensure a
low thermal load.
All rotary actuators are equipped with a standard emergency manual
control and two additional limit switches and are tested by the manu-
facturer. The limit switches are set for a 0 ... 90° operating range.
english
7