Burkert 3003 Manuel D'utilisation page 6

general hazardous situations.
To prevent injury, ensure:
• The electrical rotary actuator Type 3003 may not be used in poten-
tially explosive atmospheres (in this case please use type 3004).
• Do not put any loads on the body (e.g. by placing objects on it
or standing on it).
• Do not make any external modifications to the device body. Do
not paint the body parts or screws.
• Do not install the actuator with the cover facing down (head first).
• When installing the actuator, observe a minimum distance of
30 cm to electromagnetic sources of interference.
• Installation and repair work may be carried out by authorized
technicians only and with the appropriate tools.
• After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
• The device may be operated only when in perfect condition and
in consideration of the operating instructions.
• The general rules of technology apply to application planning
and operation of the device.
6
english
Type 3003
Generalsafetyinformation
note!
electrostatically sensitive components / modules!
The device contains electronic components that react sensitively
to electrostatic discharge (ESD). Contact with electrostatically
charged persons or objects will endanger these components. In
the worst case, they will be immediately destroyed or will fail after
commissioning.
• Observe the requirements according to EN 61340-5-1 in order
to minimise or avoid the possibility of damage through sudden
electrostatic discharge.
• You should also ensure that the electronic components do not
come into contact with nearby operating voltage.