Operation - Blumfeldt Bristol Heat Mode D'emploi

EN
16

OPERATION

Hints for operation
• The heater must be properly installed before it is used.
• Only use the patio heater when it is hanging straight.
• Although the patio heater is waterproof, you should not use it when it is
raining or wet.
• When the patio heater is not in operation, always unplug the appliance
from the wall outlet.
• The patio heater is equipped with three heat settings
On/Off switch
• Press the On/Off switch to the
„I" position, to turn the patio heater on.
• Press the On/Off switch to the
"O" position, to turn the patio heater
off.
Remote control
• Press the On/Off switch to activate
the heater.
• Press the button "LOW" on the
remote control, to operate the heater
on 900 W.
• Press the button "HIGH" on the
remote control, to operate the heater
on 1200 W.
• Press both the button "LOW" and
"HIGH" on the remote control, to
operate the heater on 2100 W.
Touch switch
• Press the On/Off switch to activate the heater.
• Touch the touch switch once to operate the heater on 900 W power.
• Touch the touch switch twice to operate the heater on 1200 W power.
• Touch the touch switch three times to operate the heater on 2100 W
power.
• Touch the touch switch four times to turn the heater off.