Fist Steps And Operation - Blumfeldt Silver Bar 2000 Mode D'emploi

FIST STEPS AND OPERATION

1. Plug in and use the power switch in the rear right side to connect the
power.
2. Press in the right side panel to switch on the heater and choose 3
different settings.
3. Press in the right side panel to set 24 hours power off.
4. Ausschalten nach 24 Stunden einzustellen.
How to operate the unit using the remote control (model 10034205)
The functions of the heater may be controlled via the buttons on your remote
control and LED screen. You may also control some of the functions of your
heater through the buttons on the front side of the heater.
1. Plug in and use the power switch in the rear right side to connect the
power.
2. Press ONE/OFF on the remote control to make the heater go into
standby.
3. Press P1 to select the heating power of 500 W.
4. Press P2 to select the heating power of 1000 W.
5. Press P3 to select the heating power of 2000 W.
6. Press TIMER to set 24 hours power off.
How to operate the unit using the remote control (model 10034206)
1. Plug in and use the power switch in the rear right side to connect the
power.
2. Press ONE/OFF on the remote control to make the heater go into
standby.
3. Press P1 to select the heating power of 1000 W.
4. Press P2 to select the heating power of 2000 W.
5. Press P3 to select the heating power of 3000 W.
6. PressTIMER to set 24 hours power off.
EN
19