Operation - Blumfeldt Gold Bar 2000 Swing Manuel

EN
18

OPERATION

Adjusting the radiation angle
Loosen the nuts on two sides to adjust the heater to the desired angle. Then
retighten the nuts.
Commissioning and operation
• Insert the plug into the socket
• Switch on the rocker switch on the heater.
• Press ON/OFF on the remote control to
start the heater. To adjust the heating power,
press MIN or MAX.
• To activate the oscillation function, press
OSC.
• To switch off the heater, press ON/OFF on
the remote control again.
• If you do not use the heater for a longer
period of time, switch it off, flip the toggle
switch and unplug the heater from the power
outlet.