Operation; Lock Function - Blumfeldt Cosmic Beam Mode D'emploi

EN
26
Note: The parts required for the installation extension are not included and
must be purchased separately.

OPERATION

Before first use, please read this manual thoroughly.
• Take out the heater from the carton carefully. Please save the carton for
off-season storage,
• Firmly fix the heater according to the installation instructions.
• Make sure that you do not use the same socket for the heater and other
high-power appliances, as this could lead to mains overload.
Switch on
• The power light flashes when the heater is connected with power.
• Press the ON/OFF button
the temperature of the room. If it is lower than the preset temperature,
the heating function will be activated and the indicator light will blink.

Lock function

• During operation, first press the SWITCH button
OFF button , the indicator light lights up. All keys are deactivated
when the lock function is enabled.
Display screen ON/OFF function
• If you press the DISPLAY button
indicator light remains on.
• Press the DISPLAY button
, to turn on the heater. The screen shows
Switch
Display
, the screen turns off but the
Display
again to turn the screen back on.
and then the ON/