Installation - Blumfeldt Bristol Heat Mode D'emploi

INSTALLATION

• The patio heater must be installed by a qualified electrician.
• Mount the heater on a stable, flat ceiling surface or install the heater on a
strong, rigid support (e.g. on strong wooden beams or metal rails).
• The ceiling hook to which the patio heater is attached must itself be able
to support 3 to 4 times the weight of the heater.
• Attach the heater hook to the ceiling hook and attach any ring of the chain
to adjust the distance between the heater and the floor.
• The distance between the bottom of the patio heater to the floor must be
more than 1.80 metres.
• Plug the patio heater into a grounded power outlet (220-240 V, 50-60 Hz,
13 A).
• Only use the heater when it is hanging straight.
Minimum required distances:
• 25 cm from the side wall
• 30-50 cm from the ceiling
• Installation height: above 1.80 m
EN
15