OPERATION
Commissioning
•
Insert the plug into the socket.
•
The ON/OFF switch on the heater is used to
switch on and control the output of the heater.
Manual operation
•
Press the ON/OFF switch to turn the power on.
•
Press the button once to run the heater at 900 W.
•
Press the button twice to operate the heater at 1200 W.
•
Press the button three times to operate the heater at 2100 W.
•
Press the button four times to turn on the LED light and operate the
heater at 2100 W.
•
Press the button five times to operate the LED light without the heater.
•
Press the button six times to switch off the light and heating.
Functions of the remote control
•
To use the remote control, the main power
switch must be turned on.
•
To turn on the LED light, press the LIGHT
button.
•
Press the LOW button for 900 W.
•
Press the HIGH button for 1200 W.
•
Press the OFF button to switch off the
heater.
EN
13